Crystal Scene Switch – 4 Scenes

Name Crystal Scene Switch (4 Scenes)
Model PLCBUS-T  4206E

 

Main Functions

1. Two-way communications;
2. Easy to be replaced of the Crystal Panel;
3. Control up to 2 scenes or 4 scenes (up to 16 Units for each);
4. Scene address codes cleanup fast function;
5. Beep indicates function;

Operations:

Operate manually very easy, i.e. tap top button for SceneON and tap bottom button for Scene Off.

2 Scenes or 4 Scenes Modes Transfer:

1. 2-Scene to 4-Scene Setup:
Press TOP button once and BOTTOM button 6 times, the last holding for
5 seconds. The LED flickers, releasing, use #4034/4036 send an address command, here the 4
buttons are for 4 different scenes now. (This address will be memorized in the BOTTOM button on the left). 
Recover back to 2-Scene: Same as above setup just hold for 10 seconds, (when 5 seconds, the LED
light on left bottom is Off, and 10 the LED is On again is for operation successfully).

2. 4 Scenes Setup:
Entering 4-Scene status,
(1), Top scene on the left: Press TOP button once and BOTTOM button 3 times, the last holding for 5
seconds. The LED flickers, releasing, use #4034 send out up to 16 addresses ON/OFF command.
When finishing setup, tap any button on #4206 for exiting.

(2). Bottom scene on the left: Press TOP button once and BOTTOM button 6 times, the last holding for
5 seconds. The LED flickers, releasing, use #4034 send out up to 16 addresses ON/OFF command.
When finishing setup, tap any button on #4206 for exiting.

(3). The two button scenes on the right setup methods are the same as the left.

Technical Specs:

Rated Voltage: 230VAC±10%, 50Hz
StaticState Wastage: <1W
Suitable Temperature: -10~50℃